DVD PLAYER CAN NOT PLAY DISC / NO DISC

Daftar Isi

DVD is a function to play cassette / disc, which can not be used again, especially the player sound system or electronic hobby. For now, DVDs are not only able to play discs, but can also function for others, USB port, which functions as an mp3 player for music, and mp4 for movies and video clips.On this occasion I will discuss about this time to play DVD no disc tapes or can not read the tape you want to play or slow to load, except before first check the cassette / Disc that will rotate already damaged many scratches / no. Among the causes of DVD Player NO DISC or can not read the tape, as follows


1. DIRTY OPTICS

Optic DVD is dirty because there is dust attached to the optical optical DVD can cause the laser beam emitted from the optic can not emit light to the cassette / disc well to read the data on the tape / disk TSB, so it can cause NO DISC from it's trying to clean the optic lens by using cotton and can not be on tap or it could be in the wind.

2. IRON SITTING OPTIC RIGHT
  
There are a number of cases of the NO DISC DVD Player, which is iron support for the forward / backward rusting optical path, the optical DVD cannot move can cause No Disc, I have experienced this. The rusted optical metal support buffer is particularly in direct contact with the optical / optical stop point of the DVD. The cause of rusting the optical buffer can be caused because the DVD Player is not operated for too long because the temperature around the DVD Player storage and the buffer needs to be removed and cleaned to remove rust

3. MOTOR / DINAMO PLAY DISC

Motor / Dynamo cassette disk players that have been damaged can cause the DVD Player to not have a disc, this is because the dynamo / motor cannot play the disc, or it could be due to the old ratio. Motor / dynamo has dropped strength Can not play the cassette / disc perfectly there is no disc and the motor / dynamo cassette / disc player needs to be replaced with a new / normal one.

4. MOTORS OF OPTIC MOVEMENTS

The damaged DVD optical drive motor / dynamo cannot move the optical The forward / backward direction can also cause the DVD Player NO DISC. And if this is broken, it needs to be replaced with a new / normal one

5. DVD OPTICAL CABLE

Optical cables that are damaged or not installed properly on the optick socket or socket on the PCB Mpeg board, can cause the DVD Player No Disc

6. MPEG

If from step 1 - 5 on all components is good and works normally but DVD Player still NOT DISC, try check MPEG / MPEG part, before turn on DVD Player a few minutes later in MPEG IC on board, usually there is wrong one MPEG IC that is broken, the IC if we are connected with more heat than the other IC in the player.

7. PSU / REGULATOR AC MATIC 

Can also cause DVD Player No Disc in because AC Matic PSU has dropped its performance / there is a worn component or there is a dry elco / leak / bubble that causes the current can not get out as needed.

Thus the print causes of DVD Player NO DISC Can not print disc tapes / or long loading